QUT offers a diverse range of student topics for Honours, Masters and PhD study. Search to find a topic that interests you or propose your own research topic to a prospective QUT supervisor. You may also ask a prospective supervisor to help you identify or refine a research topic.
Found 11 matching student topics
Displaying 1–11 of 11 results
Extraction and formulation of astaxanthin produced in Phaffia rhodozyma fermentations
Traditionally derived from unsustainable petrochemicals, astaxanthin (AX) can also be sustainably produced by microbial fermentation. The yeast Phaffia rhodozyma naturally produces AX as its main fermentation product through sugar assimilation.In previous studies, we improved the bioprocess to produce (upstream) AX in P. rhodozyma. This project aims to investigate the extraction, recovery, and formulation (downstream) of the AX produced in our improved AX production process.AX is a carotenoid pigment and potent antioxidant naturally occurring in some ocean animals such as salmonids …
- Study level
- Master of Philosophy
- Faculty
- Faculty of Science
- School
- School of Biology and Environmental Science
- Research centre(s)
- Centre for Agriculture and the Bioeconomy
Capture and reuse of phosphate nutrients
Nutrients such as ammonium and phosphate species are essential in agriculture. However, release of excessive amounts of nutrients to waterways may result in eutrophication which can lead to toxic algae blooms, killing of fish and destruction of the environment.Compounding this issue is the fact that phosphate rock sources are gradually being exhausted. Hence, finding a means to capture and reuse phosphate species from sources such as wastewater treatment plants is potentially attractive.Consequently, this project involves the development of new phosphate …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
Low Cost Catalysts for Biofuels Production
As the world transitions from fossil fuels to biomass based fuels there is a corresponding drive to create new technologies to enable this situation to come to fruition.Biofuels represent one option in terms of mitigating the impacts of global warming.The conversion of biomass to biofuels typically requires a catalyst. Many different materials have been investigated, with zeolites showing considerable promise.However, zeolite catalysts can be expensive and thus there is a challenge to create new catalysts which are low cost.This project …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
Value-adding waste materials
Many industries generate copious amounts of waste products.Of particular interest are those wastes generated by the mining sector as typically a large fraction of the ore bodies are dumped or the agricultural sector.Potential solutions we are investigating include:converting aluminosilicate waste to zeolitestransforming inorganic waste to catalyst materialscreation of materials for water and wastewater treatmentmaking activated carbonrenewable fuels,
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
Green polymer-inorganic composite materials
Composite materials are widely researched and widely used in applications such as aircraft, automobiles, ships, structural components and even the space industry.There is a need to create new composite materials which are environmentally friendly and do not use fossil fuel based products. Moreover, the properties of the composites need to be improved while at the same time minimising the costs involved.Consequently our research group is working on composite materials which not only include inexpensive inorganic fillers from the mining sector …
- Study level
- PhD, Master of Philosophy, Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
Understanding and manipulating bacterial motility for infection control
The recent COVID 19 pandemic reminds us of how difficult it is to control infectious diseases. Pathogenic microorganisms are known to be extremely 'smart' and are able to quickly develop mechanisms against most of our strategies aimed at eradicating them. Our group is focused on bacterial infections to implants and medical devices. We are in the pursuit to outsmart the bacteria to develop the next generation medical device and implant materials.Bacterial motility/movement and group-coordination on surfaces and in 3-dimensional environment …
- Study level
- PhD
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
- Research centre(s)
- Centre for Biomedical Technologies
3D Bioprinting in Cancer Research
Interested in 3D Bioprinting? Care about improving our understanding of cancer pathogenesis? Then this opportunity is for you! The Queensland University of Technology (QUT) and industry partner Gelomics Pty Ltd are seeking competitive candidates to apply for a PhD scholarship (AU $34,013 per annum) in 3D Bioprinting & Cancer Research.
- Study level
- PhD
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
An airway chip for screening viral infection mediated immune responses
Respiratory infections such as influenza, SARS-COV-2, COVID-19, and MERS are increasingly prevalent. Complications and related deaths arising from these infections are often the result of a “cytokine storm”, whereby there is an over production of proinflammatory soluble factors by immune cells, which dictates symptoms severity and mortality risk. Recent works showed that immunomodulatory therapy, with or without antiviral agents, may improve recovery outcome. However, the screening of suitable immune-modulatory and antiviral agents relies heavily on animal models which can't capture …
- Study level
- PhD, Master of Philosophy
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
Control of concentrating solar thermal power plants
Concentrating solar power (CSP) is a technology that utilises mirrors (heliostats) to focus the sun’s rays on a solar receiver. This provides heat for a power generation cycle, creating thermal energy.Control of the heat transfer fluid temperature in the solar receiver is crucial for the efficient use/storage of thermal energy and to minimise the degradation of the receiver. The aim of this project is to design controllers for the heat transfer fluid pumps and the heliostats using a previously developed model of the receiver's thermodynamics.
- Study level
- Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
Understanding the structure-property relationships in reduced graphene oxide hydrogels
Graphene consists of hybridised carbon atoms in a hexagonal two-dimensional (2D) lattice. This material has extraordinary mechanical, thermal and electrical properties. However, one problem in practical applications is the aggregation and restacking between neighbouring graphene layers.In contrast, a possible way to avoid this problem is by transforming 2D graphene sheets into graphene hydrogel (GH) consisting of a three dimensional (3D) porous structure. Recently, 3D GH has been widely investigated in energy storage and conversion, catalysis and sensors. Furthermore, its accessible …
- Study level
- PhD, Master of Philosophy
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
- Research centre(s)
- Centre for Materials Science
Centre for Clean Energy Technologies and Practices
Comparison of output from collocated solar systems of different technology
Solar panel efficiency is calculated using standardised testing conditions, allowing like-for-like comparison of systems under the same conditions. However, data collected over a three year period from two collocated solar systems of different technologies are showing unexpected results. The most efficient system's yearly output is comparatively lower. Initial data analysis explains some differences from the operational conditions, but further investigation is required.
- Study level
- Honours
- Faculty
- Faculty of Engineering
- School
- School of Mechanical, Medical and Process Engineering
- Research centre(s)
-
Centre for Clean Energy Technologies and Practices
Contact us
If you have questions about the best options for you, the application process, your research topic, finding a supervisor or anything else, get in touch with us today.